Quote:
Originally Posted by Alan Anderson
I am unable to imagine a failure that can cause this symptom. I suspect something else is going on. My first guess is that your motor controllers are miswired with the motor terminals connected to power and the power terminals connected to the motor.
What do you mean by "serial cables"?
|
First, as I described in my other replies, the we followed the wiring diagrams, and successfully used them to drive our drivetrain around for about 30 minutes.
Second, by "serial cable" I meant the db37 cable used to connect the digital sidecar to the digital io module in the crio. Sorry I used wrong name.
Any other ideas?
Thanks.