|
Re: 95 Hard at work
Bumpers routed out in the wee hours this morning.
Details:
3/4in hardwood plywood
1/4in 2-flute up-cut carbide router bit
24k rpm spindle
180ipm feed
0.19in DOC
The simpler panels on the left took about 3min of cutting time, the more complicated parts on the right took about 14min of cutting time. Plunge speed is the main limiting factor it seems, and that will be my next set of experiments.
__________________
Theory is a nice place, I'd like to go there one day, I hear everything works there.
Maturity is knowing you were an idiot, common sense is trying to not be an idiot, wisdom is knowing that you will still be an idiot.
|