|
Re: Practical 3D printed parts
We're printing a radio / camera / sensor tower that mounts onto the corner of our drive frame. We will still probably protect this with an overall polycarbonate shroud once everything is on the robot.
__________________
Ryan Dognaux :: Last Name Pronounced 'Doane Yo'
Team 234 Alum: 2002 - 2005 :: Purdue FIRST Member: 2006 - 2009
Team 1646 Mentor: 2007 - 2009 :: Team 357 Mentor: 2009 - 2012
Team 4329 Mentor: Current
STL Off-Season Event: www.gatewayroboticschallenge.com
|