Quote:
Originally Posted by Mark McLeod
Are you doing the explicit steps to compile and download the code to the robot?
On the Project Explorer window expand Build Specifications, then right-click on the entry under that for the pop-up menu: - Build
- Run as startup
or are you using the Run arrow (Debug-only)? |
Quote:
Originally Posted by Cecil
On the bottom of your Project Explorer, you will see "Build Specifications". Expand that, and you will see "FRC Robot Boot-Up Deployment". Right click on this and select "Build". This will build your project (it does not need an active connection to the robot to do this). Once this has completed, right click again and select "Run as Startup". When it has completed, it will ask you if you want to reboot the controller (select yes, it will reboot automatically). Your code should then be persistent on the controller.
|
Quote:
Originally Posted by BenGrapevine
I'm not at all a wiring person but I'm guessing something related to backflow on the CIM?
|
Yeah I'm assuming that that's one of the problems because the code we uploaded was autogenerated by LabView. It can't have been a coding problem because that code wasn't modified.