Quote:
Originally Posted by eddie12390
I'd just like to note that your IP address seems to be set incorrectly if you are using Wi-Fi to connect to the robot.
The adapter in use should have an IP address of something like 10.52.02.XX (where XX is a number like 05 or 12) and a subnet mask of 255.0.0.0. Your configuration currently seems to be for team 25120 on your wireless card.
You should also disable the network adapter that isn't currently in use when connected to the robot.
|
We aren't using wifi, we're using a local area connection. We have an ethernet cable directly connected to the modem which is connected to the cRIO. I thought I had set up the IP address correctly, I did it according to the guide.