|
Re: Ball Shifter coupling not together??
Quote:
Originally Posted by Aren_Hill
This is intended, as it sets the spacing for the piston to plunger attachment to make sure the mechanism works correctly.
|
Hey we encountered one more problem Aren, The standoffs for the 3rd stage are not 1"....more like 1 7/8"...so they stick out farther, the gear and bearing no longer are contained and will need to have a spacer made to keep them on. The bigger problem is our belly pan that was machined based on specs and now we will have to cut belly pan to fit the shifters in.
__________________
"Do not argue with an idiot. He will drag you down to his level and beat you with experience"
|