Quote:
Originally Posted by apples000
This is the third time you have posted this. It's really hard for anybody to help you, as this could be caused by a large number of things. Try loading a new default robot project on the robot.
|
I'd like to apologize in behalf of Reed. He was a bit flustered due to the issues we were having yesterday.
A clarification for all of you that are kind enough to help. We programmed in C++. Sadly I have next to no knowledge in programming so there isn't much else I can tell you. All I know is when we use a basic code that we wrote to see if the code was being properly uploaded, everything was good on the Driver Station. We were also able to do the same once adding basic drivetrain code to (coded 6 talons). However our issue came up when we attempted to add pneumatics onto the code. Whenever we tried to activate the compressor there was no signal on sidecar. The solenoids were getting signal though!
Again I would like to sincerely apologize for the minor post spamming, I hope that you guys are able to help.
Thanks,
Kevin