I think you're working from documentation that is out of date by many years.
Quote:
Originally Posted by TechWarlock
the 8 is supposed to represent the slot we put the NI 9472 into
|
The first parameter doesn't specify the slot number in the chassis. It specifies the "module number", which is either 1 (for the first module of a given type) or 2 (for the second module). If you're putting your NI 9472 module in slot 3, it's module number 1. If you're putting it in slot 4 of a 4-slot cRIO or slot 7 of an 8-slot cRIO, it's module number 2.
Slot 8 of an 8-slot cRIO is always empty.