|
...you know the correct size tap and clearance hole drill bits for any size screw.
...you no longer need Band-Aids because the machine oil permanantly embedded in your hand clots cuts for you.
...you can recite the densities of every material used on your robot.
...you don't need a manual to know what wire gauges are required for the various motors.
...you can accurately guess the size of something down to 1/16".
...your hand feels akward without a drill in it.
...your computer's desktop is filled with all the drawings for your robot.
...you always carry a pad of graph paper with you in case you get an idea for the robot.
...your average response time to an email about programming is less than 30 minutes.
...you spend 200+ hours writing software tools for robotics in the off-season.
...you have an RC, an OI, and a box of old motors in your room for testing stuff.
|