Quote:
Originally Posted by Al Skierkiewicz
Sorry to start off with this..
R77
The only pneumatic system items permitted on 2014 FRC ROBOTS include the items listed below.
C. Solenoid valves with a maximum 1/8 in. NPT port diameter
You linked a 1/4" valve.
|
Good call Al, but no worries, just a bad link.
we've got the avs-5211, it's rated at .67 Cv which should be enough for our application.
Please let me know if I understand your description of the wiring correctly. I takeaway that the solenoid breakout is wired via wago to the same 24v black terminals on the PDB as the cRIO, so that 24v reach the breakout. Then the black signal wires from the solenoid itself are connected to a particular port on the breakout to transmit that signal. My description is not as eloquent, but please let me know if we got this right.. Thanks..