I'm sharing three of 222's currently 3D printed parts on our 2014 robot that I feel will benefit other teams at this time.
A zip folder has been attached to this post and contains .stl, .ipt, and .stp file formats for each part. Two of the parts (.ipt format) have team #'s suppressed. If you want to add your own just unsuppress the text and modify as desired.
1: Nasson pressure switch mount.
Mount the mount as desired using the two holes. Once mounted clip in the switch. For extra security secure switch and wiring with ziptie.
2: VexPro 1x2" extrusion end cap.
3: Clippard air tank to VexPro 3 CIM ball shifter mount.
Mount two of these to the top of the 3 CIM ball shifters using 1/4-20 bolts. Insert tanks. Zipties may be used around the tanks to keep them from slipping back through the mounts easily.
For those wondering all of these parts were printed on Stratasys FDM 3D printers in ABS.