|
Re: pic: How do we operate this valve?
I'm pretty sure that's 1/8" NPT. That chromed fitting looks like the standard 1/4" OD tubing to 1/8" NPT fitting. Based on the fingers in the picture, that tubing looks to be a plausible 1/4" OD, and nominal OD for 1/8" NPT is about 0.4". So, while it's a beefy valve, that still appears to be in compliance with the rules. A good measurement to double check would be in order.
__________________
2013 Alamo Regional Woodie Flowers Finalist Award Winner
2012 Texas Robot Roundup Volunteer of the Year
Texas Robot Roundup Planning Committee, 2012-present
FRC 6357 Mentor, 2016-
FRC 2789 Mentor, 2009-2016 -- 2 Golds, 2 Silvers, 8 Regional Elimination Appearances
FRC 41 Mentor 2007-2009
FLL Mentor 2006
FRC 619 Mentor 2002
FRC 41 Student 1998-2000
|