[Jon Stratis]

As an inspector, I need to be able to see what breakers you have and what gauge wire goes into each slot. Based on your pictures, it's going to be very difficult for an inspector to do that. I've said it before and I'll say it again... an annoyed inspector is a thorough inspector. A setup like that would definitely annoy me, but I would do my best to accommodate that. That doesn't mean I won't then spend 15 minutes examining every edge for sharpness, and measure the bumpers precisely, and make you explain anything that could even remotely be of questionable safety (like the use of springs or surgical tubing). Having a board where the inspector can't see the breaker values really just gets you off on the wrong foot with the whole inspection process.