|
Re: Practical 3D printed parts
Our team made a small 3d printed cam with a half inch hex center. We plan on using this to hit a limit switch once per revolution to tell us when our catapult has reset.
__________________
Ryan Dognaux :: Last Name Pronounced 'Doane Yo'
Team 234 Alum: 2002 - 2005 :: Purdue FIRST Member: 2006 - 2009
Team 1646 Mentor: 2007 - 2009 :: Team 357 Mentor: 2009 - 2012
Team 4329 Mentor: Current
STL Off-Season Event: www.gatewayroboticschallenge.com
|