Quote:
Originally Posted by Qbot2640
Zmarken is correct about the rule, but something else is wrong here, because wiring this motor to a Spike with a 20A fuse should work just fine. We re-did our frisbee shooter using this same configuration, and it works fine ("Demonstration Mode" now!)
A Banebots 390 has about the same rpm - but is lower torque...the 395 is a bit faster...still lower torque though. Both can be run from a Spike legally this year.
|
Were you running the am-0912 with a spike on your frisbee shooter? I just took a look at all the stall currents of the motors given, and it seems if stall current>30A, then it can't be run on a spike.