View Single Post
  #4   Spotlight this post!  
Unread 09-02-2014, 00:32
Zmarken Zmarken is offline
Registered User
FRC #1716 (Redbird Robotics)
Team Role: Engineer
 
Join Date: Dec 2013
Rookie Year: 2012
Location: De Pere
Posts: 30
Zmarken is an unknown quantity at this point
Re: Problem connecting to the CRIO

Quote:
Originally Posted by silas13579 View Post
Hello all,
I'm from the same team and as an update, when we try to connect we get error 44002 about 50 times: Warning <Code> 44002 occurred at Ping Results: link-bad, DS radio(.4)-GOOD, robot radio(.1)-bad, cRIO(.2)-bad, FMS-bad Driver Station. It is something like this each time, except the radio flashes between GOOD and bad every other time. Both computers we have tried have windows firewall off.

Any and all help is appreciated.
If you look here (under ping status), 44002 is explained a bit. That doesn't really tell you much though.

Looking further through the that website, under "Diagnostics Tab", it says
Quote:
"DS Radio" is a legacy indicator used to indicate the ping status to an external radio on the DS side at 10.XX.YY.4.
So, a couple of things I can think of... Does the 44002 warning change between
Quote:
Warning <Code> 44002 occurred at Ping Results: link-bad, DS radio(.4)-GOOD, robot radio(.1)-bad, cRIO(.2)-bad, FMS-bad Driver Station.
and anything else?

Secondly, and you might just want to do this anyways, but have you tried this? If you hook up your router to that, it should set the IP correctly, if that's the issue.

Also, something else to try: hook up directly to the cRIO and deploy to that, instead of going through the router, just to see if that works, or if you still lose connection.

That's all I can think of right now... Hope that helps.
Reply With Quote