Quote:
Originally Posted by nathannfm
If it helps "Loctite 222MS" was what caused what is pictured, that has since run out and we switched to Loctite 242, I can test some of that on the broken part and see if it reacts differently.
|
I wouldn't recommend it, the following is taken from
http://www.loctiteproducts.com/p/t_l...r-Blue-242.htm
Code:
Not Recommended For
Use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials
Use on plastic parts, particularly thermoplastic materials where stress cracking of the plastic could result