Quote:
Originally Posted by sanddrag
HAAS MiniMill. Trim C350 coolant at 7% Brix, 4 streams high pressure flood. Lakeshore carbide 1/4" 3fl ZrN coated endmill. 10% Stepover. 6000 RPM. 120 IPM pocketing. 0.010 finish pass at 60 IPM. No tumbling or anything. Just a deburring knife on the edges.
We fixtured by just bolting it down to a fixture plate that we drilled and tapped with a few holes.
|
120 IPM pocketing? I'm jealous, I usually consider myself lucky if I can get 20 IMP. Of course, that's with a something like 50% stepover and non HSM toolpaths...