Thread: Enhanced I/O Missing
View Single Post
  #13   Spotlight this post!  
Unread 10-02-2014, 11:46
jarruda jarruda is offline
Software Engineer
AKA: Justin Arruda
FRC #1350 (Rambots)
Team Role: Mentor
  
Join Date: Apr 2012
Rookie Year: 2004
Location: United States
Posts: 16
jarruda is an unknown quantity at this point
Re: Enhanced I/O Missing
Quote:
Originally Posted by Joe Ross
Upon further investigation, it's the LED that's broken. I think it's safe to ignore it. If you plug in Joystick 5, the I/O light turns on.
Unfortunately attempting to utilize the EI/O from robot code throws an Enhanced I/O Missing exception when trying to configure it, so it seems that the issue is not only the LED. I will attempt to connect a joystick to port 5 to see if it will fool the DS into thinking it's connected.

Quote:
Originally Posted by Zmarken View Post
You might've already done this, but not mentioned it, but have you made sure the service is started? That could potentially be the issue, as it's mentioned in the "Messages" in your first screenshot...
The service is indeed started. The correct version would not show up in device manager if it was not.

Furthermore, the device is working on the I/O tab. It displays live accelerometer data and the current state of the various buttons and switches that I have connected to the Cypress board.
Reply With Quote