Quote:
Originally Posted by EliStevens12
My FRC team was wondering if there was any specification to where the orange light needed to be, we were wondering if it needed to be on some type of post, or it just had to be visible, or if there are no specification about the orange light at all. Any help would be greatly appreciated, Thank You.
|
Please see R63. Posted here for convenience:
R63
ROBOTS must use at least one (1) diagnostic ROBOT Signal Light (RSL) (P/N: 855PB-B12ME522).
Any RSL must be:
mounted on the ROBOT such that it is easily visible while standing three (3) ft in front of the ROBOT,
connected to the “RSL” supply terminals on a Digital Sidecar that is connected to an NI 9403 module in Slot 2 of the cRIO, and
wired for solid light operation, by placing a jumper between the “La” and “Lb” terminals on the light per Figure 4-13.
See the 2014 ROBOT Data Diagram on the KOP website and the item bulletin for connection details.
Figure 4-13: Jumper on RSL