Quote:
Originally Posted by Aren_Hill
I much prefer drilling out the holes in the input block to a clearance for 10-32, and then either milling clearance for a 10-32 socket head, or grinding down the screw head diameter so it fits nicely.
8-32 screws in a 10-32 holes? no thanks
-Aren
(this is a personal recommendation only, not a VEXpro one)
|
No arguments from me.
How easy or difficult is it to drill out those holes to 10-32 size, given that smaller holes are already there that are on a slightly different center? Drilling them out to a bigger size is easy, but moving the center of the hole sounds pretty tough to me. Disclaimer: I'm not exactly a genius when it comes to machining.