|
Re: Compressor gets hot and blows line
Katie,
Your statement is true. Legal fittings are more than brass. However,
R87
The relief valve must be attached directly to the compressor or attached by legal fittings connected to the compressor output port. If using an off-board compressor, an additional relief valve must be included on the ROBOT.
implies that best practice places it close to the compressor. Brass is still legal too.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
|