|
Re: RSL not blinking and Relay not getting signal
Is the Driver Station in Autonomous?
The RSL is solid during Autonomous.
If that's not it then...
No error messages on the Driver Station Diagnostic tab?
Communication & Robot Code lights are green?
The RSL is not directly affected by user code.
The FPGA blinks it according to what it's told by the cRIO FIRST communications layer based on the field mode (Disabled, Autonomous, Teleop).
There are other error codes, such as a fast blink if it isn't communicating with a Driver Station at all.
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 14-02-2014 at 16:17.
|