|
Re: Encoders to PWM
Encoders actually get plugged into the digital i/o section of the digital sidecar. You should hook up the leads of the encoder to 2 3-pin connectors with one having A and ground and the other having B and power (or vice versa - the important thing is that A and B are on separate connectors). Put A and B on the signal pins and power and ground on the appropriate pins.
__________________
Alum of 1629 - GaCo [2005-2008]
Mentor for 3634 - Hard Botties [2013-2015]
Mentor for 230 - Gaelhawks [2013-2015]
Pittsburgh Regional Planning Committee [2016-?]
|