17-02-2014, 09:41
|
 |
no bag, vex only, final destination
AKA: Pinecone
 FRC #0228 (GUS Robotics); FRC #2170 (Titanium Tomahawks) Team Role: Mentor
|
|
Join Date: Dec 2008
Rookie Year: 2006
Location: Glastonbury, CT
Posts: 7,675
|
|
|
Re: URGENT- VEX 2 CIM Ballshifter will not disengage
"80 pounds" means nothing without the size of your lever arm and the amount of reduction post-shifter that your system has.
We have 80 pounds running on a 1.5" diameter pulley running off a 20:84 reduction between the shifter and the winch. This means we are putting 60 inch pounds of torque on the output. Thus we are putting approximately 14.25 inch pounds of torque on our ball shifter. Under this load, we can release it with about 30 pounds of force. Possibly less.
What I would suggest is either adding more shifting force (though this is a little dangerous as the shifting bearing can't take much more loading) or adding a reduction between your shifter and your winch.
__________________
Mentor / Drive Coach: 228 (2016-?)
...2016 Waterbury SFs (with 3314, 3719), RIDE #2 Seed / Winners (with 1058, 6153), Carver QFs (with 503, 359, 4607)
Mentor / Consultant Person: 2170 (2017-?)
---
College Mentor: 2791 (2010-2015)
...2015 TVR Motorola Quality, FLR GM Industrial Design
...2014 FLR Motorola Quality / SFs (with 341, 4930)
...2013 BAE Motorola Quality, WPI Regional #1 Seed / Delphi Excellence in Engineering / Finalists (with 20, 3182)
...2012 BAE Imagery / Finalists (with 1519, 885), CT Xerox Creativity / SFs (with 2168, 118)
Student: 1714 (2009) - 2009 Minnesota 10,000 Lakes Regional Winners (with 2826, 2470)
2791 Build Season Photo Gallery - Look here for mechanism photos My Robotics Blog (Updated April 11 2014)
|