18-02-2014, 09:58
|
 |
 |
Roaming GeorgiaFIRST MC
AKA: The Mecanum Man
 FRC #1058 (PVC Pirates) Team Role: Alumni
|
|
Join Date: Jan 2011
Rookie Year: 2008
Location: Clemson, SC
Posts: 456
|
|
|
Re: R3 20" rule
Quote:
Originally Posted by yash101
There's a good drawing of this on the frc-manual site. To accurately depict it, think of tying a string to the bumpers, able to move with 0 friction around the bumpers. cut it to 20 inches. That is the maximum external allowance!
That should get you close to the drawings provided!
|
This isn't totally correct. The 20" is with regards to the frame perimeter, not the edge of your bumpers.
__________________
This is our Robot. There are many like it, but this one is ours.
Measure twice, cut once, curse, buy more, and cut again.
2014- Excellence in Engineering (UNH), District Chairman's Award (NU), #8 Quarterfinalist (NECMP), Winner (Mainely Spirit)
2013- Semifinalists (Battlecry@WPI) Winner (Mainely Spirit)
2012- Regional Chairman's (GSR), Finalists as the #11 Alliance Captain (Battlecry@WPI)
2011-Xerox Creativity Award (GSR), Semifinalists (GSR) Innovation in Control (Virginia)
2010-Champion (GSR), Undefeated (Chesapeake), Coopertition Award (Chesapeake), Quarterfinalists (Galileo) 8th AC (IRI)
2008-Undefeated (GSR), Xerox Creativity Award (GSR)
|