|
Re: Re: Using two Large PAPST Fans?
Quote:
Originally posted by rust710
All Fans hook directly to a 20 amp circuit breaker. The same breaker can be used for all fans. I even put the speed controllers fans on the separate fan breaker. My thought is that if you pop the 40 amp breaker on the motor you should probably still cool the speed controller and you are saving .5 amps that can be sent to the motor.
|
Not a bad idea! Add a little weight in wire for stable, independent cooling. Cool!
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
|