Quote:
Originally Posted by JimmyNutrin
The wheels also have a lot of friction to them, and some of the rollers were locked up when I found them. (vise grips time).
|
Your rollers may be tight due to the bushings having urethane leaking into them during the molding process. It can be cleared out following the procedure shown in the following video we made several years ago. The process is different from the one Andy Baker shows in his video. We did clear it with him before posting.
http://www.youtube.com/watch?v=1mrNH0Czq0I
The other reason the rollers may be tight is if the aluminum spiders are "pinching" the rollers. We removed the pinched roller and used large pliers or channel-locks to bend the fingers for that roller apart slightly.
Hope this helps.