|
Re: 44006 error - please help...
-44006 is just a warning that the Cypress IO board isn't being detected.
Not unusual if you aren't using the Cypress board.
The status lights you report mean that the DS and ping the cRIO and robot bridge.
The lack of Communication/Robot code lights means the cRIO image is not running. (P.S. or in this case the DS is not connecting)
Do you have the NoApp switch set?
It's on the face of an 8-slot cRIO, or on a 4-slot is checked with the cRIO Imaging Tool.
Fire up NetConsole to see if any error messages get reported when the cRIO is booted.
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 24-02-2014 at 09:23.
|