Quote:
Originally Posted by Dr.Gusta
We just wrap the rope around the peice of 1/2" hex shaft. We use the high torque third stage offered by VEX for their ball shifter and I measured it with a fish scale attached to the rope and unspooling the rope by pulling on the scale. It read out 14lbs consistently.
|
Here's what I think you are saying. Correct me if it's wrong:
There's a substantial speed reduction gear stage that's still connected to the winch when you release it.
You are pulling with 14lbs at a radius of 1/4"
How is the 1/2" hex shaft supported?