|
Re: Battery Problem
Check the analog breakout board on the robot. You need to provide 12V power to it from one of the 20A circuit breakers on the PBD (The red/black connectors, NOT the regulated output on the end). If you're doing that correctly, then look at the edge and see if it's a pre-2014 board. Figure 4-14 in the Robot Rules shows how to apply a jumper on pre-2014 boards to get the battery readout on the driver station.
__________________
2007 - Present: Mentor, 2177 The Robettes
LRI: North Star 2012-2016; Lake Superior 2013-2014; MN State Tournament 2013-2014, 2016; Galileo 2016; Iowa 2017
2015: North Star Regional Volunteer of the Year
2016: Lake Superior WFFA
|