|
Re: 3D Printed Ball Shifter Pneumatic Coupler
We were having problems with a 3d printed coupler so we designed a bearing block style coupler for 1-1/16 bore cylinder and have not had a problem yet. The bearing is now half inch OD and we use the same snap rings without a problem.
__________________
2015: Galileo Semifinalists
2015: North Star Regional Finalists (Thanks to 5576 and 2531)
2014: North Star Semifinalist (Thanks to 2175 & 4607)...again
2014: Central illinois Semifinalist (Thanks to 1756 & 1288)
2013: North Star regional Winner (Thanks to 2175 & 4607)
2013: Curie Semifinalist (Thanks to 2056 & 3990)
2013: IRI Semifinalist (Thanks to 359, 1477, & 148)
|