|
Re: Help! Rookie team and i need help with the signal light..
Lewis,
When everything is connected as shown on the FRC website, there is a little LED that is right next to the white connector that will turn on. If the RSL is not lighting up the same way as the LED, then there is a wiring issue to the RSL. If it doesn't not light, then the cable to the digital module is not correctly seated and/or the DSC is not getting power. Both of these items must be good for the DSC to feed signals correctly, including the RSL.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
|