|
Re: New robot rules at Peachtree
Quote:
Originally Posted by Max Boord
Nope. It states that a pressure vent valve must be in both places. This is different from a ball valve. We had a pressure vent valve in place on both but where required to add a ball valve in addition to our vent valve on our off board setup.
|
When you plugged in the compressor to the robot, did this go through your (at the time, one and only) manual ball valve? R85 (Figure 4-16) shows the ball valve as still be available to vent all pressure while an off board compressor is hooked up to the system. The intent is for the manual release to be available at all times - for those purposes, having two on the robot or one on the robot and one with the off board compressor satisfies that intent, and helps keep the entire system safe.
__________________
2007 - Present: Mentor, 2177 The Robettes
LRI: North Star 2012-2016; Lake Superior 2013-2014; MN State Tournament 2013-2014, 2016; Galileo 2016; Iowa 2017
2015: North Star Regional Volunteer of the Year
2016: Lake Superior WFFA
Last edited by Jon Stratis : 17-03-2014 at 23:30.
|