|
Re: Al's Annual Inspection Thread
Phil,
This was asked on the LRI telephone conference last night. It sounds like you are planning a legal implementation, again providing all bumper rules are met. I reminded LRIs that the 1" hard parts restriction still applies, so consider that as well. The 1" extends out from the Frame Perimeter, not the back of the bumper. So if your mod is affected by hardware or other protrusions on the frame, it may not pass inspection.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
|