[nick1023]

We puchased 120T 5mm HTD timing belts via Vexpro for our drive system. Vexpro, WCP and the Robot Space are all out of stock on these. Vexpro customer support said not to expect any to show up before the end of the FRC season.

The hex shaft pulleys also purchased from Vexpro are 17.5 mm wide. The "9mm" wide belts are actually 8.5 mm to so that two can fit on the 17.5 pulley. I cannot locate another supplier who has actual 8.5mm belts instead of 9mm.

If you have spares to sell or can suggest a supplier for 5mm pitch 120T HTD timing belts with an 8.5 mm width I'd appreciate a link.

Thanks!
Nick