|
Re: 8 volts over talons
So with the striped down code, the only way to stop the motor is to disable the robot?
Try getting rid of the "if" part all together - just set the motor to 1.0 and see what happens. I would also try 0.9, see if the output value changes.
__________________
2007 - Present: Mentor, 2177 The Robettes
LRI: North Star 2012-2016; Lake Superior 2013-2014; MN State Tournament 2013-2014, 2016; Galileo 2016; Iowa 2017
2015: North Star Regional Volunteer of the Year
2016: Lake Superior WFFA
|