Quote:
Originally Posted by FrankJ
This discussion got started because the OPs switch was turning off at 105 psi. I am not sure where the point of diminishing returns on your system is, but I would say generally speaking I expect it is more than 105 psi. Our comp bot was good at 110 psi. I think our compressor was on for most of the match so the HP cutoff wasn't that important. If you are running a off robot compressor, there is a big difference between 105 & 120 psi in terms of storage. Compressor efficiency is less of an issue if you are running an off board compressor.
|
Yes if you are running an off board compressor that is a different story but with an on-board compressor having it shut off at 105 is perfectly fine and I would say desirable.