|
Re: Parade Preparation
We run a T-Shirt Shooting Robot during a parade every year, some things I always do to prepare would be; tighten set screws, check wire harness between distro board and cRIO, tighten set screws, rubber mount the radio, tighten set screws, charge the DS, tighten set screws, and the real biggie... switch over to pneumatic tires running at approx. 30 psi. Pneumatic tires will ensure you don't rattle the robot into pieces.
__________________
2012-2014 Mechanical Team FRC 1710
2014-2015 Chief Operations Officer FRC 1710
2016-Present FTAA
|