|
1) AutoCad Inventor - to figure out what I'm building should look like
2) NASTRAN - to figure out if what I'm building will break
3) CNC Mill - esp when Rick V is running it. He plays a mill like Heifitz plays a violin. Besides it makes a pretty good drill press too! If necessary an manual will do most times.
4) lathe - i love to watch the chips fly
5) Datco - a dremmel on steroids
6) band saw - too much work to cut 1" stock by hand
__________________
Christopher H Husmann, PE
"Who is John Galt?"
|