Quote:
Originally Posted by sandiegodan
The AndyMark STEP file is only of the tiles and tape inside the field. No documented record of the Alliance Stations.
|
Look at the Full_Field_V5.3_Full_Detail.STEP file. It shows the Alliance Stations. I only have a free STEP viewer and it doesn't seem to have a measurement tool. With my calibrated eyeball, it appears to be set back ~.5 tiles and be ~1.75 tiles deep. This would support the traditional setback of 12" and depth of 42"
That amounts to about 21 feet across. Add in a little more space for the FTA to get around the field. Should be close enough for you to gage space requirements for your qualifier.
Good Luck!