View Single Post
  #1   Spotlight this post!  
Unread 01-10-2014, 13:16
DarkRune DarkRune is offline
Registered User
AKA: Dylan Baker-Flynn
FRC #4159 (CardinalBotics)
Team Role: Driver
 
Join Date: Aug 2014
Rookie Year: 2012
Location: San Francisco
Posts: 100
DarkRune is a jewel in the roughDarkRune is a jewel in the roughDarkRune is a jewel in the rough
Constant Orange Light on Spike

Hi guys,
Our compressor isn't running when we enable to robot, below is everything I've noticed:

Light on the Spike stays orange when we enable the robot
Light on the sidecar turns on when we enable
PWM cable has been switched out many times, still doesn't work
20 amp breaker in spike and pd board, neither breaker trips when we enable
Compressor works when bypassing the spike
We've been running the same compressor code since St. Louis, it worked at a previous off season, so we are very certain it is not a code problem

We have an off season event this friday, so any help is appreciated.
Thanks,
Dylan