Quote:
Originally Posted by SteveGarward
Thanks for the feedback. For the above, the VRM has two outputs for each of the voltage/current combinations. So, two each of:
5V @ 500mA
5V @ 2A
12V @ 500mA
12V @ 2A
If you want to use the same circuit powering the wireless is up to you.
|
The outputs are not separate. For example, there is one 5V @ 2A supply with 2 connectors. For that reason, I speculate that nothing else will be allowed to be connected to the 5v 2A supply besides the radio, but I have no insight into the rules.
See the "Briding Ouputs of VRM for more Current possible" thread on the beta forums.