Quote:
Originally Posted by wasayanwer97
I don't know about him, but I'd sure like to see a stress analysis.
Call Andrew Pizza Hut, because he better deliver.
|
Wasay, I'm feeling more like Digiorno right now.
Quote:
Originally Posted by Joe G.
Nice case! Have you considered implementing cable retention into the base piece?
|
Thank you! It wasn't in my original design, but as Electronica1 mentioned below, it's definitely possible to.
Quote:
Originally Posted by mrnoble
Are the standoffs 3D printed, or are they aluminum or steel? Even with the 10/32s running through them, that would be the only part I'd have any concern about.
|
The standoffs are printed as well (they are a part of the base - they don't come off), but with a decent enough wall thickness to hold their own (it's an odd number due to the wall thicknesses driving the overall dimensions of the case, I forget the exact number). I'm sure aluminum standoffs could be used just as well.
Quote:
Originally Posted by Electronica1
Could you modify the 3d printed base to include something like this? |
It definitely can include something like that. There's plenty of room.