View Single Post
  #4   Spotlight this post!  
Unread 23-11-2014, 17:18
Joe G.'s Avatar
Joe G. Joe G. is online now
Taking a few years (mostly) off
AKA: Josepher
no team (Formerly 1687, 5400)
Team Role: Mentor
 
Join Date: Sep 2006
Rookie Year: 2007
Location: Worcester, MA
Posts: 1,443
Joe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond repute
Send a message via AIM to Joe G.
Re: One tool/machine to level up a moderate shop

Quote:
Originally Posted by asid61 View Post
Good advice. However, I disagree about the X-Y table for the drill press. Drill presses are not designed AT ALL for milling. If/when the spindle bearings fail, then the whole thing becomes a massive safety hazard. This is not a substitute for a mill and should not be used as one or anything other than plastic.
I would say that if your primary interest in a mill is the ability to precisely locate features and do hole patterns, an X/Y table and drill press is a great choice. However, as soon as jobs that require endmills get introduced, time to step it up to a real mill.

I will second the many suggestions in this thread to look to the used market. Be patient, and you'll find some great deals. My team got a FANTASTIC deal on a great quality off-brand Series 1 mill clone, with DRO, work holding, and X power feed included, for $700. We've also gotten a 12" lathe at a used tool shop for $600, and had a smaller lathe donated.
__________________
FIRST is not about doing what you can with what you know. It is about doing what you thought impossible, with what you were inspired to become.

2007-2010: Student, FRC 1687, Highlander Robotics
2012-2014: Technical Mentor, FRC 1687, Highlander Robotics
2015-2016: Lead Mentor, FRC 5400, Team WARP
2016-???: Volunteer and freelance mentor-for-hire