Quote:
Originally Posted by DampRobot
At this point, I blame those failures on a bad run of VP belts rather than the inherent disadvantages of belts or non center to center designs.
|
I really don't think it's either of these - I think 9mm belts on 24T pulleys are just very undersized for your application. You will likely continue to have failures even with other brands of belts. If you can't go above 24T pulleys, you have to go to 15mm wide belts if you want to be safe.
(I know you are probably aware of this by now, but I just wanted to say this publicly for the reference of others reading this thread.)