Quote:
Originally Posted by staplemonx
For the stacks I thing you need two extra yes or no columns that identifies if each stack has been containerized and noodled.
Since people may have stacks that are 4 tubs and 4 tubs with a container for example you may want to change the input method a bit.
Have them identify the total number of slot and then have them put the tube number for each of those stacks and then add the containerized and noodlized columns for each.
Does that make sense?
|
There is a method for identifying if a stack has a container and litter. It's to the right in green.
I decided against having a specific stack identified as having a container on it since there can be a significant quantity of stacks in play.
Instead I chose to have all the containers identified since there's a static number available for play. You can identify the level at which the container is scored. Doing it this way allows the number of totes in a stack and the level of the container is at to be de-coupled (since this isn't necessarily equivalent depending on tote orientation).
Think of it as identifying the # of stacked totes on the left, and the position of the containers/litter on the right side of the spreadsheet.
@Chris G, I'll incorporate your suggestions and update the linked spreadsheet.
I agree the reset button was something I thought would be useful also, just didn't have time yesterday. I'll try to have it added in the version with the fixes you identified.