Quote:
R71 “Working” air pressure on the ROBOT must be no greater than 60 psi and must be provided through one primary adjustable,
relieving, pressure regulator, relieving, pressure regulator.
|
and the blue box says:
Quote:
|
Norgren regulator P/N: R07-100-RNEA or Monnier P/N: 101-3002-1 recommended.
|
Which sounds to me like they have a typo

but if the "secondary" regulator you have meets the 125 psi requirement, and is a relieving pressure regulator, it should be ok. Keep in mind that I'm not the Q&A.