Thread: Compressor Wiring to Pneumatic Module too small.
View Single Post
  #10   Spotlight this post!  
Unread 12-01-2015, 09:38
adciv adciv is offline
One Eyed Man
FRC #0836 (RoboBees)
Team Role: Mentor
  
Join Date: Jan 2012
Rookie Year: 2010
Location: Southern Maryland
Posts: 478
adciv is a name known to alladciv is a name known to alladciv is a name known to alladciv is a name known to alladciv is a name known to alladciv is a name known to all
Re: Compressor Wiring to Pneumatic Module too small.
(Alpha/beta team) We've been running 22 AWG wires for solenoids with no issues. The compressor was wired using 18AWG.

For inserting the wires, I recommend pressing in the button on the weidmuller connector prior to inserting the wire. I also recommend tinning 22 AWG wires.

I suspect the majority of issues here are from the wire becoming bent during insertion. Most of the strands are probably not being caught by the connectors. I have been able to lift our wiring board partially off the ground by these connectors with an 18 or 19 AWG wire in them. Consider that at least a 10lb pull test.
__________________
Quote:
Originally Posted by texarkana View Post
I would not want the task of devising a system that 50,000 very smart people try to outwit.