|
Re: Window Motor Hub Help
If you are unable to work with the file from thingiverse let me know. I have the same kind of adapter we made for our ball retrieval arm on last years robot. I have the file in STEP and Inventor. It will be easy to remove the hex end and just keep the denso star portion.
Good luck with this. Do remember that PLA is not very strong so make sure you are dealing with the load in a mechanism prior to the adapter. You can try ABS if you able to print with it. We went through a few of these adapters by worlds due to this. Luckily we designed the arm to allow easy access to the adapter and just printed a bunch and changed them out as needed. Not ideal but worked well enough.
Good luck this year!
Aloha
__________________
Team 3880 - "Tiki Techs" "Mr. H" - Tiki Technologies Coach / Mentor
Kealakehe High School Robotics - Kailua-Kona, Hawaii
__________________________________________________ _____________________________
2016 Hopper Division | Orlando Regional Engineering Inspiration Award | Hawaii Regional Chairman's Award & Finalist & Woodie Flowers Finalist
2015 Carson Division | Silicon Valley Regional Engineering Inspiration Award | HI Regional Regional Winners & Engineering Inspiration & Deans List Finalist
2014 Newton Division | Hawaii Regional Engineering Inspiration Award & Deans List Finalist
2013 Newton Division | Inland Empire Regional Regional Chairman's & Creativity Award | Los Angles Regional Engineering Inspiration Award | | HI Regional
2012 Curie Division | Hawaii Regional Engineering Inspiration Award
2011 Newton Division | Hawaii Regional Regional Winners & Industrial Design Award
.
__________________________________________________ _____________________________
|